AN17581 - WirelessUSB™ LP RDK Japanese Radio Law Testing and Verification
This application note serves as a reference point in selecting a WirelessUSB LP radio for your application needs. The use of a Cypress radio chip and its suitability for Japanese product development...
View ArticleAN4004 - Interference Mitigation Challenges and Solutions in the 2.4 to 2.5...
As more products use 2.4-GHz ISM band of the radio spectrum, designers have to deal with increased interference signals from other sources. Regulations governing unlicensed parts of the spectrum state...
View ArticleAN48610 - Design and Layout Guidelines for Matching Network and Antenna for...
This application note describes the matching network and antenna design recommended for the 2.4-GHz WirelessUSB LP/LPstar radio. A properly designed PCB facilitates the evaluation, characterization,...
View ArticleAN6066 - Wireless Binding Methodologies
Introduction Robust wireless systems require a well thought out method of establishing a connection between different elements in the system. This method is called "binding", its purpose is to enable...
View ArticleAN4003 - WirelessUSB™ 2-Way HID Systems
The WirelessUSB™ 2-Way Human Interface Device (HID) protocol is designed for reliable 2-Way communication between a wireless bridge and target HID applications in 1:1 (one HID and one bridge) and 2:1...
View ArticleAN84783 - Accurate Measurement Using PSoC® 3 and PSoC 5LP Delta-Sigma ADCs
AN84783 shows how to increase the accuracy of measurements using the 20-bit Delta-Sigma ADC in PSoC 3 and PSoC 5LP. You will learn effective resolution, gain and offset errors, nonlinearity, and...
View ArticleAN86947 - Optimizing USB 3.0 Throughput with EZ-USB® FX3™
Introduction Cypress’s EZ-USB FX3, the next-generation USB 3.0 peripheral controller, provides highly integrated and flexible features that enable developers to add USB 3.0 functionality to any...
View ArticleAN68829 - Slave FIFO Interface for EZ-USB® FX3™: 5-Bit Address Mode
Introduction Cypress’s EZ-USB FX3 is the USB 3.0 peripheral controller that allows developers to add USB 3.0 functionality to any system. The controller works well with applications such as imaging...
View ArticleAN70707 - EZ-USB® FX3™/FX3S™ Hardware Design Guidelines and Schematic Checklist
Introduction Cypress’s EZ-USB® FX3™ is the next-generation USB 3.0 peripheral controller, providing integrated and flexible features. FX3 has a fully-configurable, parallel, general programmable...
View ArticleAN76405 - EZ-USB® FX3™ Boot Options
Introduction EZ-USB FX3 is the next-generation USB 3.0 peripheral controller, providing highly integrated and flexible features that enable developers to add USB 3.0 functionality to a wide range of...
View ArticleAN76348 - Differences in Implementation of EZ-USB® FX2LP™ and EZ-USB FX3...
Introduction Cypress EZ-USB FX3 is a USB 3.0 peripheral controller with highly integrated and flexible features that add USB 3.0 functionality to any system. With the release of the USB 3.0...
View ArticleAN70983 - Designing a Bulk Transfer Host Application for EZ-USB® FX2LP™/FX3™
Introduction This application note demonstrates how to use the Cypress library for Microsoft .NET languages to implement host PC applications to communicate with Cypress's FX2LP and FX3 devices. Using...
View ArticleAN87216 - Designing a GPIF™ II Master Interface
Introduction Cypress’s FX3 is a USB 3.0 peripheral controller, which provides highly integrated and flexible features to enable developers to add USB 3.0 functionality to any system. FX3 has a...
View ArticleClik here to view.
AN32200 - Clocks and Global Resources
PSoC® has a variety of programmable parameters affecting its functionality. AN32200 explains each parameter under the Global Resources, the relevance of each parameter to the operation of the device,...
View ArticleClik here to view.
AN45022 - USB to DMX512 Converter
AN45022 describes a USB to DMX512 converter, which uses Cypress’s CY8C24x94 family of devices. The included GUI application allows you to transfer data through the DMX512 interface as the network...
View ArticleAN65974 - Designing with the EZ-USB® FX3™ Slave FIFO Interface
AN65974 describes the synchronous Slave FIFO interface of EZ-USB FX3. The hardware interface and configuration settings for the FLAGs are described in detail with examples. The application note...
View ArticleAN84868 - Configuring an FPGA over USB Using Cypress EZ-USB® FX3™
AN84868 shows you how to configure a Xilinx FPGA over a slave serial interface using EZ-USB® FX3™, which is the next-generation USB 3.0 peripheral controller. This interface lets you download...
View ArticleAN75779 - How to Implement an Image Sensor Interface with EZ-USB® FX3™ in a...
Introduction The high bandwidth provided by USB 3.0 puts high demands on ICs that connect peripherals to USB. A popular example is a camera streaming uncompressed data into a PC. In this application...
View ArticleAN89661 - USB RAID 1 Disk Design Using EZ-USB® FX3S™
Introduction The USB standard allows many peripherals to be connected using a single, standardized interface. Proven over the years as a reliable, expandable, fast, low-cost, low-power, and...
View ArticleAN90369 - How to Interface a MIPI CSI-2 Image Sensor With EZ-USB® CX3
This application note also gives implementation details about the USB Video Class (UVC). Conforming to this class allows the camera device to operate using built-in PC drivers and Host applications,...
View Article