Introduction
This application note shows how to implement a full featured USB-to-UART bridge using PSoC 1. This solution is designed as a reference for designers who need such a bridge in their system. This solution can be implemented and tested on a CY3214 USB Evaluation Board.
.bmp)
|
Example Project |
Supported H/W and S/W | Supported PSoC1 Devices | |||||||||
| PSoC Designer Version | H/W Kit | CY8C20xxx | CY8C21xxx | CY8C22xxx | CY8C23xxx | CY8C24xxx | CY8C27xxx | CY8C28xxx | CY8C29xxx | ||
| Yes | 5.4 | CY3214 | x94 | ||||||||
The following video tutorial walks-through the process of creating a USB-to-UART Bridge on a Cypress PSoC 1. Watch the video to learn how to design a USB-to-UART Bridge from scratch using a CY3214-PSoCEvalUSB and PSoC Designer software.